Many people think of penis increases, but they are a little scared of the familiar methods.In medicine, there is a tool like a vacuum pump.
It is used to operate the male genitals to maintain the size of the penis.
How the pump works
The operating principle is very simple.With the help of the vacuum around the penis, weak pressure occurs, causing stimulation of blood circulation.Therefore, the spongy tissue is filled with blood, and therefore, the penis increases and hardens rapidly.Similar phenomena in drugs are called congestion.
During an erection, the fabric of the penis is poured into the blood and swells from then on.The vacuum pump stimulates the container and allows you to maintain member size for 30 to 60 minutes.Additionally, this device can be used instead of massage.
The pressure in the flask expands the sponge and significantly increases blood flow and penis size.The members behind the pump look more spectacular than the normal excitement.
Do not abuse the vacuum pump during use.The genitals don't get more from it than this, but bleeding, bruising and other complications can happen!
variety
All vacuum pumps have similar designs without considering their principles of action.The container where the male organs are located is a plastic bottle with splits.With her, there is a seal and pear nozzle in the suit, which pumps pressure inside the flask.
Equipment with other equipment: pressure adjustment button, pressure measuring device, reset valve.
In manual, pump the air with a pear or piston and remove it.Their application is great because it can be used by everyone who wants to add genitals.
In an automatic vacuum, it is created using an electric pump that works on the battery.Pressure can be monitored on the installed pressure gauge and equipped with a button for absorbing force.
Water equipment is a more modern option for adding male penis.Their principle of action is based on the fact that the flask is pumped with a pump.Hydraulic foam has higher efficiency and has a longer life.
How to choose a pump?
The device is selected according to two criteria: in terms of genitals and specific tasks.
- The length of the blood vessel should be at least 2-3 cm larger than the penis in the excited state.
- During an erection, the diameter of the flask that is 1-2 cm larger than the diameter of the male member must be selected;
- For those who do this for the first time, experts recommend using manual float and using pears for air pumping.
It is best to buy equipment with transparent bottles to monitor the process and pay attention to the strength of the manufacturing material.
Pros and cons
A male vacuum pump can not only increase the size of the penis, but also have therapeutic effects.If you use it continuously, the volume of male genitals increases over time, and erections last longer during sexual intercourse.This is due to the reduction in organ sensitivity.
Furthermore, male dignity increases not only in length but also in width.
Similarly, under the influence of vacuum, you can adjust the shape of the male organ, especially when it is curved.Within the pump, the penis is held evenly from the edge of the wall, straightening it in this way.
Consequences of improper use:
- Strange spots appeared on the skin of the penis due to capillary violations.
- Reduce ejaculation or erection;
- numbness.
Efficiency during use
After continuous use, the shape and size of the penis will remain unchanged after six months.If you take drugs that increase the release of androgens during this period, the results will be more effective.
The member after the pump is longer than 3 cm and lasts for 6 months to one year.The thickness of dignity is increased to 2 cm.
Instructions for use
If the vacuum pump is used for the first time, the process should not last for more than 5 minutes to avoid consequences.Improper use can lead to certain functional and edema diseases.
To prevent this from happening, the following recommendations must be followed
- First, air must be pulled out of the device, which will improve circulation of blood flow to the penis.In the past, it was necessary to take care of the lubrication of the penis.
- A penis increase should not last for more than 20 minutes.
- To reduce the pressure inside the container, you need to start the air.To do this, just place special valves near the pear.In some models, for these purposes, there is a small hole covered by fingers during the surgery.
- Once the member reaches maximum hardness, you need to wear a ring on its base that provides an overgrown organ and keeps it in an erect state.
- If a pump with a hydraulic pump, you must relax with hot water before the operation.After that, after 8 minutes, male dignity must be placed in a vacuum container.The ring should be tightly fitted to the scrotum, thereby reducing the pressure in the area.The device is placed in such a way that the distance from the penis to the wall of the flask is the same as that of each side.It is important to do this before the suction starts.Observe these instructions to avoid injury.
- To create a vacuum environment, experts recommend multiple oscillation movements.Then use the trigger to reduce the excess water.Sometimes, the pump must be pressed several times to make the entire excess liquid leaf.
- After the water drops, you can take a break and proceed with the program.If the pressure drops, it must be pumped to the desired level.
A special set of exercises can be used to improve male advantage, but for this, all recommendations for using the device must be followed.
During the first week, the process proceeds for 10 minutes a day.
In the second week, twice a day for 10 minutes.
Fourth time - 15 times a day, the fifth to 20 minutes in the morning, and 10 minutes in the evening.
Possible consequences
Due to improper use of the equipment, injuries often occur.
- Due to the stagnation of lymph nodes, a swollen ring appeared around the head of the penis.Sometimes this problem can occur even in proper use.In this case, it is best to stop the program for a period of time.
- Due to the prolonged operation of the blood vessels or the result of low pressure, huge lymphatic flow occurs, forming swelling.
- Erection worsens are the most common results.
- With a large load, the color of the skin may change.Due to severe emissions, bleeding often occurs, which can be irreversible.
- Bone of blood vessels is the rarest problem, but dangerous, so it is best to postpone businesses to increase penis.
Contraindications
The duration of the vacuum environment depends on the cell expansion.Under all suggestions for using the device, pulse effects will occur within the container.As it increases, negative pressure occurs, which can cause numbness and one does not feel pain.
The volume of the maximum vacuum should not cause pain, but should not exceed a single effect of 18 seconds.The duration of vacuum operation per day should not exceed 45 minutes.
This member's male penis has the following contraindications:
- diabetes;
- sexually transmitted diseases;
- Inflammation of the urethra;
- The function of the excretion organs of the digestive system is deteriorated;
- Cardiovascular pathology;
- Risk of blood clots.
Operation of the equipment
Special care is required to keep the equipment suitable for as long as possible.Given that the operation is carried out in intimate places where careful compliance with personal hygiene rules requires, the pump must be treated with an antibacterial solution.
Before use, it is recommended to clean the vacuum pump with warm water and soap and treat all ingredients with preservatives.After the operation, the invention is sterilized again, wiped and stored in a clean and dry place.
How to do it yourself?
This device can not only increase the size of a man's reproductive organ or healing therapy.
Pumps can be made with improvised means stored in a garage or food pantry.
Pump from cuff
Before starting manufacturing, it is necessary to prepare all spare parts and tools available for use.Vacuum pumps are usually made of a car or bicycle cuff pump.This is the easiest and most reliable method.
First, you need to create the opposite effect of the pump so that it does not provide air, but instead, pull it out.To perform such an effect, it is necessary to release the pump, rotate the cuff to the back, and then assemble the device.This will create a vacuum environment.
Next, install the check valve to lower the air.The valves of the aquarium compressor are suitable for this.It is installed in the pump hose to prevent air from penetrating into the pump.For greater effect, it is recommended to seal it.
This method is the easiest and aims to create shallow vacuum environments.Performance up to 80% air pumping.If you need to make a more powerful pump, you can use a home compressor.
Using a medical syringe
We make vacuum pumps from conventional medical syringes.To do this, the following materials are required:
- Plastic T-shirts;
- The plastic tube should be consistent with the diameter of the holes of the T-shirt and syringe;
- Two valves from the aquarium compressor;
- Syringe (the function of future devices depends on their size).
From the plastic tube, it is necessary to cut three pieces of 10 cm and then attach it to the T-shirt.The joints should be sealed and well-secured to avoid jumping out when pressure occurs.A t-shirt with three bouncers should be obtained.
One of them is located in the center and attached to the nose of the syringe.At the remaining ends, it is necessary to install valves, one should be opened and the other should be opened inward.To not be confused, arrows are usually placed on the aquarium valve indicating the direction of air movement.
This device made of syringes can pump liquid from one container to another.
To perform the procedure, one evacuation with a valve is lowered into the liquid, the second is carried out in an empty container and needs to be filled.The pump is driven by a piston.